IWCF & IADC Surface Well Control and Well Intervention Courses

Instructors:

Various EPL instructors

Background:

• EPL IWCF and  IADC (WellSharp) Well Control and Well Intervention courses are based on the standard IWCF and IADC syllabuses which will be forwarded to participants after registration. The standard syllabus may also be downloaded from IWCF or  IADC website (e.g. www. iwcf.org)
• Audience: Everyone involved in the drilling and well completion process: Drilling Managers, Company Men, Drilling Engineers, Toolpushers, Drillers, Assistant Drillers, Derrickmen, Well Completion Engineers, Wireline and Coiled Tubing Engineers etc.
• The participants should have a basic understanding of maths, be able to use a calculator and must be familiar with basic drilling equipment. Participants new to the oil industry should attend a basic drilling course prior to attending this course.

• Entrac Petroleum Baghdad

  IENA Building, Near Philippines Embassy

  Al-Waha Mall Street, University of Baghdad Junction        

  Jadiriah

  Baghdad

  email:   info@entrac-petroleum                     OR                                                                   This email address is being protected from spambots. You need JavaScript enabled to view it.

العنوان: مركز فضاء العراق - مجاور السفارة الفلبينية - شارع مول الواحة - تقاطع جامعة بغداد مجمع الجادرية – الجادرية – بغداد – العراق
أوقات الأستعلامات و الاستفسار من الساعة التاسعة صباحا الى السادسه مساء.
الرجاء الاتصال على 

  info@entrac-petroleum or This email address is being protected from spambots. You need JavaScript enabled to view it.   Tel: +964 773 485 5848

A free  book to all our candidates.

Learning Outcome:

The participant will be able to understand well control equipment and well control methods and will be awarded an IWCF or  IADC ( WellSharp) certificate on passing a formal IWCF or  IADC test. The tests  can be a paper test or an online test.

Registration

 Please register at centre and then send your CR number and passport scan to

 This email address is being protected from spambots. You need JavaScript enabled to view it.  OR This email address is being protected from spambots. You need JavaScript enabled to view it.

 We also run petroleum courses at refresher and advanced levels.

بالإضافة الى دورات تخص الحقول النفطية.

 أوقات

 الأستعلامات و الاستفسار 
من الساعة التاسعة صباحا الى السادسه مساء.
الرجاء الاتصال على الرقم  Tel: +964 773 485 5848 

 IWCF Well Control (Surface BOP stack): Level 2

 This program is designed for people in critical well control positions on drilling installations as well as onshore roles. The candidates will complete an IWCF accredited training course, taught according to IWCF syllabus, in order to prepare them for assessment.

 Candidates who pass the exam will be awarded IWCF certificates issued from IWCF in the UK. 

 Level Two: No Simulator Required 

 Validation Period  

·      Level 2 training – Consists of two written assessments: Equipment and  Principles & Practices Papers. 

·      If passed, the candidate will be awarded a certificate, which is valid for 5 years. 

  Examination

  To pass the assessment and obtain a certificate, candidates must achieve a minimum mark of 70% in each  section of the examination. 

 Each candidate is required to complete two written test papers which include multiple choice questions and Kill Sheet calculations. 

 All candidates are allowed between 1.5 and 2.5 hours to complete this section, depending on the options taken. 

 The examinations are made up of multiple choice problem questions. Candidates must be able to identify equipment components and operating procedures using diagrams and schematics. 

Independent invigilators who are registered and approved by the IWCF conduct the written tests at our Centre. 

 Examination Times

 Level 2: 

 Surface Equipment: 1 hr 

 Surface Principles and Procedures: 1.5 hr 

 How do I register? 

  Please send the following details:   

·       Full Name:  

·       City/Town:  

·       Email Address:  

·       Phone number:  

·       Name of course: 

·       CR Number and a passport scan

 For more information, please call  Tel: +964 773 485 5848  

 IWCF Well Control (Surface BOP stack): Level 4  

This program is designed for people in critical well control positions on drilling installations as well as onshore roles. The candidates will complete an IWCF accredited training course, taught according to IWCF syllabus, in order to prepare them for assessment. 

  Candidates who pass the exam will be awarded IWCF certificates issued from IWCF in the UK.

 Level Four: Simulator Required

 Course Objectives:

This program is aimed at people who are in critical well control positions during well intervention operations. Candidates will complete an accredited training course, taught according to IWCF syllabus, in order to prepare them for assessment. 

 At the end of the course delegates should be able to: 

·         Understand of well control methods relating to well intervention operation. 

·         Identify completion types, equipment functions and industry practices. 

·         Identify barrier systems and know the terminology. 

·         Identify well control methods. 

·         Identify solutions to various well control problems. 

·         Determine if well control equipment is fit for purpose. 

·         Design a well kill plan for a production well and generate a kill graph. 

·         Discuss production well kill problems and recommend appropriate solutions. 

 The course is delivered through lectures supported by animations, self-study exercises, and group discussions. The course concludes with two closed-book examination
 leading to the required certificate of competence in well intervention.

 Certification is valid for two years.

 Eligibility

 For anyone who has completed level 2 and is either an engineer or a supervisor. 
In some cases, very experienced engineers can do level 4 without doing level 2, but this engineer must have attended several industry training courses such as the Shell rounds 1 and two.

 Validation Periods

  Level 4 training – Consists of two written assessments and a practical assessment using simulator equipment.

  If passed, the certificate is valid for 2 years.

 Examination

 To pass the assessment and obtain a certificate, candidates must achieve a minimum mark of 70% in each section of the examination. 

Each candidate is required to complete two written test papers which include multiple choice questions and Kill Sheet calculations. All candidates are allowed between 1.5 and 2.5 hours to complete this section, depending on the options taken.

 The examinations are made up of multiple choice problem questions. Candidates must be able to identify equipment components and operating procedures using diagrams and schematics.

 Independent invigilators who are registered and approved by the IWCF conduct the written tests at our Centre.

 Examination Times

  Surface Equipment: 1 hr

  Surface Principles and Procedures: 2.5 hrs

Practical Examination on a simulator

Candidates undertaking level 4 course will also undergo a practical assessment. Assessment is usually conducted in pairs of a driller level candidate and a supervisor level candidate.

  How do I register?

 Please send the following details:  

•           Full Name: 

•           City/Town: 

•           Email Address: 

•           Phone number: 

•           Name of course: 

·               CR Number and a passport scan          

For more information, please call  Tel: +964 773 485 5848 

IWCF Well Intervention:  Level 2

This program is designed for people in critical well control positions on drilling installations as well as onshore roles. The candidates will complete an IWCF accredited training course, taught according to IWCF syllabus, in order to prepare them for assessment.

Candidates who pass the exam will be awarded IWCF certificates issued from IWCF in the UK. 

No Simulator Required

For anyone who has completed level 2 and is either an engineer or a supervisor. In some cases, very experienced engineers can do level 4 without doing level 2, but this engineer must have attended many industry training courses such as the Shell rounds 1 and two.

 Course Objectives 

This program is aimed at people who are in critical well control positions during well intervention operations. Candidates will complete an accredited training course, taught according to IWCF syllabus, in order to prepare them for assessment.

At the end of the course delegates should be able to:

·         Understand of well control methods relating to well intervention operation

·         Identify completion types, equipment functions and industry practices

·         Identify barrier systems and know the terminology

·         Identify well control methods

·         Identify solutions to various well control problems

·         Determine if well control equipment is fit for purpose

·         Design a well kill plan for a production well and generate a kill graph

·         Discuss production well kill problems and recommend appropriate solutions

The course is delivered through lectures supported by animations, self-study exercises, and group discussions. The course concludes with two closed-book examinations

  leading to the required certificate of competence in well intervention. Certification is valid for two years.

  Validation Period

 Level – 2 training: Consists of two written assessments and a practical assessment using simulator equipment.

 If passed, the certificate is valid for 5 years.

Examination

To pass the assessment and obtain a certificate, candidates must achieve a minimum mark of 70% in each section of the examination.

Each candidate is required to complete two written test paper which include multiple choice questions and Kill Sheet calculations.

The examinations are made up of multiple choice problem questions. Candidates must be able to identify equipment components and operating procedures using diagrams and schematics.

All candidates are allowed one hour to complete this section.

Independent invigilators who are registered and approved by the IWCF conduct the written tests at our Centre .

  Examination Times

 Four possible  exams:

 2 Mandatory Exams

        ·                     Completion Equipment: 30 minutes

        ·                     Completion Operations: 1 hr 

 Two optional exams

·                     Coiled Tubing: 30 minutes, or

               ·                     Wireline: 30 minutes, or

               ·                     Both together

How do I register?

•           Full Name: 

•           City/Town: 

•           Email Address: 

•           Phone number: 

•           Name of course: 

·                CR Number and a passport scan        

 For more information, please call Tel: +964 773 485 5848

 IWCF Well Intervention:  Level 4